T5 vs T8 Slim Batten Identification for UK Kitchen Lights

If you are trying to identify an old slim batten in a UK kitchen, check the tube diameter and lamp base first.

A T5 tube is approximately 16 mm in diameter and typically uses a G5 base with 5 mm pin spacing. A T8 tube is approximately 26 mm in diameter and typically uses a G13 base with 13 mm pin spacing.

Do not identify the tube from its kitchen location, brightness, or approximate length alone.

Use:

Tube Diameter → Lamp Base → Exact Length → Tube Markings → Electrical Compatibility

to identify the existing lamp before ordering a replacement.

T5 or T8 – A 30-Second Identification Check

Identification PointT5T8
Tube DiameterApprox. 16 mmApprox. 26 mm
Diameter in Inches5/8 in.1 in.
Typical Lamp BaseG5G13
Pin Spacing5 mm13 mm
ProfileSlimmerWider
Directly InterchangeableNoNo

The simplest initial check is:

About 16 mm + G5 → Typically T5

About 26 mm + G13 → Typically T8

If those checks are not conclusive, read the tube markings and measure the exact lamp length.

Does a Slim Batten Mean It Is T5?

No.

Slim Batten ≠ T5

T5 and T8 identify tubular lamp sizes. A slim batten describes the physical form of the complete light fitting.

Older slim fluorescent battens often used T5 tubes because the smaller 16 mm lamp diameter allowed a compact fixture profile.

That does not mean every narrow fitting contains a T5 lamp.

Modern integrated LED battens make the distinction even more important. A narrow LED batten can contain an integrated LED light source rather than a removable T5 or T8 tube.

Therefore:

Fixture Shape ≠ Lamp Type

If the LEDs are built into the luminaire, identifying the fixture as T5 or T8 from housing width is misleading.

How to Identify a T5 or T8 Kitchen Light

Diameter and lamp base provide the strongest initial evidence. Tube markings and exact length provide additional confirmation.

Measure the Tube Diameter

The letter T refers to the tubular lamp shape. The number represents tube diameter in eighths of an inch.

For T5:

5 × 1/8 in. = 5/8 in. ≈ 16 mm

For T8:

8 × 1/8 in. = 1 in. ≈ 26 mm

The difference is normally visible when the lamps are placed side by side.

For an installed kitchen fitting, measure the actual tube with a ruler or calliper instead of judging its diameter by eye.

Check the G5 or G13 Lamp Base

Inspect the pins at the end of the tube.

A T5 normally uses a G5 mini bi-pin base, with approximately 5 mm between the pins.

A T8 normally uses a G13 bi-pin base, with approximately 13 mm between the pins.

The corresponding lamp holders are physically different, so the base is a useful confirmation when tube diameter is difficult to judge.

Read the Tube Markings

Check the printing near either end of the existing lamp before disposing of it.

You may find markings such as:

  • T5 14W 570mm
  • T8 18W 600mm

Exact codes vary by manufacturer.

Useful information can include:

T Designation → Wattage → Length → Model → Electrical Information

Taking a clear photograph of the marking and both lamp ends can make replacement identification easier.

Measure the Exact Length

Do not buy a replacement simply because two tubes appear approximately the same length.

T5 and T8 lamps are available in multiple sizes, and similar nominal descriptions do not guarantee identical physical dimensions.

Before ordering:

Tube Diameter + Lamp Base + Exact Length + Electrical Compatibility

should all be confirmed.

Does T5 or T8 Determine Brightness or Efficiency?

No.

T5 and T8 describe tube dimensions, not guaranteed lighting performance.

Brightness and energy performance depend on the actual lamp or luminaire.

Compare:

Lumen Output → Wattage → Luminous Efficacy → Electrical System

rather than treating tube diameter as a performance rating.

This distinction is particularly important with T5 High Output (T5HO) fluorescent lamps.

A T5HO belongs to a different output class from a standard T5 lamp. Comparing it with a standard T8 based only on tube diameter can therefore produce a misleading conclusion.

LED replacements vary even more widely in output and efficacy.

Use the actual product specification when comparing performance.

Where Are T5 and T8 Lights Found in UK Kitchens?

Installation location can provide a clue, but not proof.

The slimmer T5 format has historically suited compact applications such as:

  • Under-cabinet task lighting
  • Worktop lighting
  • Shelving
  • Other narrow linear fittings

T8 became common in broader general linear fluorescent lighting and may appear in older kitchen or utility-room ceiling battens as well as garages, workshops, offices, and schools.

However:

Under-Cabinet ≠ Automatically T5

Ceiling Batten ≠ Automatically T8

Always identify the lamp itself.

Why Can’t T5 and T8 Tubes Be Interchanged?

Tube diameter is only the first compatibility difference.

T5 normally uses G5 lamp holders, while T8 normally uses G13 holders. Their different pin spacing prevents a standard direct swap.

Fluorescent fittings also rely on an electrical system that includes the ballast.

A replacement therefore needs to match both:

Mechanical Compatibility + Electrical Compatibility

LED retrofits add another layer because the replacement lamp may be designed to operate with a specified ballast or require a different wiring arrangement.

A tube fitting physically into a lamp holder does not by itself establish electrical compatibility.

Can You Replace a T5 or T8 Fluorescent Tube With LED?

Often, but the replacement method depends on the LED product and existing fitting.

LED tube products may be described in the UK market as:

  • Ballast-compatible
  • HF-compatible
  • Ballast-bypass
  • Direct-wire
  • Mains-powered

These terms describe different electrical relationships with the existing fluorescent fitting.

Before buying an LED replacement, check:

Lamp Base → Exact Length → Existing Ballast / Wiring → LED Input Requirement → Manufacturer Compatibility → Installation Instructions

Do not assume that an LED tube is compatible simply because it has a G5 or G13 base.

Where the existing wiring needs to be modified, follow the product instructions and applicable electrical requirements.

Should You Replace the Tube or the Complete Batten?

A tube-only retrofit can make sense when the existing fitting remains serviceable and a verified compatible LED replacement is available.

A complete LED batten becomes more relevant when other parts of the fluorescent system are also approaching the end of useful service.

FactorLED Tube RetrofitComplete LED Batten
Existing Housing RetainedUsuallyNo
Existing Lamp Holders RetainedOftenNo
Ballast CompatibilityMay require checkingNot applicable
Installation ScopeCan be lowerComplete fixture replacement
Existing Fixture Condition MattersYesLess relevant
Ability to Change DistributionLimitedGreater

Consider complete replacement when the existing fitting has:

  • A failing ballast
  • Damaged lamp holders
  • Persistent flickering or starting problems
  • A deteriorated housing
  • Poor light distribution
  • Limited replacement-lamp availability

An integrated LED batten replaces the traditional fluorescent lamp-and-ballast architecture with a complete luminaire incorporating LEDs, optics, thermal management, and an LED driver.

For an aging fitting, compare:

Replacement Cost → Installation → Energy → Maintenance → Lighting Performance → Future Parts Availability

rather than the price of one replacement tube alone.

What Should You Check Before Buying a Replacement?

Document the existing kitchen light before ordering.

Check:

  1. Tube type – T5 or T8
  2. Tube diameter
  3. Lamp base – G5 or G13
  4. Pin spacing
  5. Exact tube length
  6. Existing wattage
  7. Fluorescent or LED technology
  8. Ballast or wiring configuration
  9. Supply requirements
  10. Fixture condition
  11. Required lumen output
  12. Preferred colour temperature

If the specification remains unclear, photograph:

Tube Markings + Lamp Ends + Lamp Holders + Fitting Label

This gives a supplier more useful evidence than asking for a “slim kitchen tube.”

What Does the UK Fluorescent Phase-Out Mean for T5 and T8?

For Great Britain, the transition away from traditional fluorescent lighting is relevant when deciding whether to continue maintaining an older T5 or T8 fitting.

Government RoHS determinations revoked mercury exemptions covering common double-capped linear fluorescent lamps for general lighting, including diameter categories covering T5 and T8. Those exemptions expired on 1 February 2024.

This does not mean an existing T5 or T8 fitting automatically needs to be removed.

For an older installation, the practical decision is increasingly about:

Lamp Availability → Ballast Condition → Maintenance Cost → LED Retrofit Compatibility → Complete Fixture Replacement

Requirements can differ between Great Britain and Northern Ireland, while special-purpose lamps can be subject to different provisions.

FAQ

How Can I Tell If My Fluorescent Tube Is T5 or T8?

Measure the tube diameter and inspect the lamp base.

T5 is approximately 16 mm and normally uses G5. T8 is approximately 26 mm and normally uses G13.

Confirm with the printed lamp code and exact length before ordering.

What Is the Difference Between G5 and G13?

G5 and G13 are different bi-pin lamp bases.

G5 has approximately 5 mm pin spacing and is commonly associated with T5 tubes. G13 has approximately 13 mm pin spacing and is commonly used with T8 tubes.

They are not directly interchangeable.

Does a Slim Batten Mean It Uses a T5 Tube?

No.

Slim batten describes the fixture form rather than the tube diameter.

Some older slim battens contain T5 tubes, while integrated LED battens may contain no replaceable T5 or T8 lamp.

Can I Replace an Old Fluorescent Kitchen Tube With LED?

Often, but compatibility must be confirmed.

Check the lamp base, exact length, ballast or wiring configuration, input requirements, and LED manufacturer’s instructions.

Matching physical dimensions alone do not establish electrical compatibility.

Should I Replace the Tube or the Complete Kitchen Light?

Retain the fitting when it remains in suitable condition and a verified compatible replacement provides the required lighting performance.

Complete batten replacement becomes more relevant when the ballast, lamp holders, housing, or other components are aging, or when improved distribution, efficiency, controls, or maintenance are priorities.

T5 vs T8 – Identify First, Then Choose the Replacement

For an old UK kitchen batten, begin with physical identification:

Tube Diameter → G5 / G13 Base → Exact Length → Tube Markings

Then determine:

Fluorescent / LED Technology → Ballast / Wiring → Replacement Compatibility

Do not identify the lamp solely from where the fitting is installed, and do not assume every slim batten contains a T5 tube.

For a single kitchen fitting, a compatible replacement tube may be sufficient.

For larger commercial LED linear lighting projects, fixture condition, lumen output, distribution, electrical architecture, controls, installation requirements, certification, and maintenance should be evaluated together before deciding between lamp-level retrofit and complete fixture replacement.

Enjoy Our Content?

Add our website as a preferred source on Google to discover more of our latest articles.

Share:

Leave a Reply

Your email address will not be published. Required fields are marked *